Technical specification on sliced veneer
Veneer Gallery
Glossary
Last News:
14 Dec 2006
Veneer section and
gallery updated
14 Dec 2006
Flooring boards information updated
19 Sep 2007
Sawn timber section and prices updated
|
TECHNICAL SPECIFICATION ON SLICED VENEER
Oak, sycamore, cherry, ash veneer
| Species: |
White oak, sycamore, cherry,
ash |
| Dimensions: |
Thickness:
Width:
Length: |
0.6 mm
100 mm and up
500..3500 mm |
| Moistness: |
6..8% |
| Tolerances: |
On thickness:
On width: |
+/- 0.02 mm
+/- 10 mm |
| Cutting Methods: |
Quartered or plain slicing |
| Quality Requirements: |
Grade AB:
- knots not allowed
- flakes not allowed (for oak)
- discolorations not allowed
- sapwood not allowed
Grade B:
- sound occasional and blending knots allowed with diameter up to
4mm
- dark knots not allowed
- small flakes allowed (for oak)
- small discolorations allowed
- sapwood not allowed
Grade C:
- knots allowed
- discolorations allowed
- sapwood allowed
General Requirements:
- rot, insects, wormholes, bark, shakes not allowed
- falling out knots, knot holes not allowed
- torn grain not allowed
|
| Packing and Marking: |
Veneer is shipped in bundles,
32 veneer sheets same size per bundle. Each bundle has the label, indicating
specie, dimensions of veneer sheets in the bundle (length, width),
overall quantity of veneers in bundle and grade.
Veneer bundles are shipped on pallets. Bundles on pallet are covered
by polyethylene film. |
Beech veneer
| Species: |
Beech |
| Dimensions: |
Thickness:
Width:
Length: |
0.6 mm
60 mm and up
500..3300 mm |
| Moistness: |
6..9% |
| Tolerances: |
On thickness:
On width: |
+/- 0.03 mm
+/- 10 mm |
| Quality Requirements: |
Grade AB:
- knots not allowed
- false heartwood not allowed
- splits not allowed
Grade B:
- sound knots with max. diameter 10mm allowed
- 3..4 dark knots with max. diameter 4mm per running meter allowed
- ray flecks with thickness up to 5mm allowed
- false heartwood not allowed
Grade C:
- sound knots with max. diameter 12mm allowed
- 3..4 dark knots with max. diameter 4mm per running meter allowed
- ray flecks allowed
- false heartwood allowed but not more than 20% of sheet area
General Requirements:
- rot, insects, wormholes, bark not allowed
- falling out knots, knot holes not allowed
- chemical discolorations, stains not allowed
|
| Packing and Marking: |
Veneer is shipped in bundles,
32 veneer sheets same size per bundle. Each bundle has the label, indicating
specie, dimensions of veneer sheets in the bundle (length, width),
overall quantity of veneers in bundle and grade.
Veneer bundles are shipped on pallets. Bundles on pallet are covered
by polyethylene film. |
Please refer to Veneer Gallery or contact us to learn more about our veneer.
|
|
|
