Offer and Pricing
Updated 23 Sep 2022
|
|
Here you can find descriptions and prices of the following typical products:
Round Timber (Veneer Logs and Saw Logs)
Please note that now it's impossible to purchase logs from Ukraine because Ukrainian Parliament prohibited export of round logs.
According to new legislation all wood logs except pine starting from 1st Nov 2015 are prohibited for export from Ukraine.
Pine logs are prohibited for export starting from 1st Jan 2017.
Later we were able to offer you the following logs:
Oak logs 1st grade (Veneer grade)
| Minor diameter: |
40 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim (and/or double-lengths), first segment |
| Quality: |
veneer - no knots, no bulge, straight, round trunk, no rot, no decay, no
wormholes, no cracks, no splits, etc. |
Oak logs 2nd grade (A grade)
| Minor diameter: |
35 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, no twist |
| Year rings: |
4 each 1 cm |
| Knots: |
no |
| Splits: |
allowed: up to 4 m length straight split
not allowed: cross-splits, year ring cracks, etc. |
| Color: |
light, no stain, etc. |
| Rot and wormholes: |
no |
| Bend: |
no |
Oak logs 3rd grade (B grade)
| Minor diameter: |
30 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, allowed: by max. 20% of pieces some twist |
| Knots: |
allowed: some sound knots |
| Splits: |
allowed are straight splits on both ends, which can reach up to core. The
total length of these splits on the surface may not exceed the double-length of diameter
not allowed: cross-splits, year ring cracks, etc. |
| Color: |
also darker color is allowed, no stain, etc. |
| Rot and wormholes: |
no (in wood) |
| Bend: |
up to 2 m lengths practically straight
only one-sided bend up to 3 cm per one meter (total 15 cm) is allowed |
Red Oak logs 1st grade (Veneer grade)
| Minor diameter: |
40 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim (and/or double-lengths), first segment |
| Quality: |
veneer - no knots, no bulge, straight, round trunk, no rot, no decay, no
wormholes, no cracks, no splits, etc. |
Beech logs 1st grade (Veneer grade)
| Minor diameter: |
35 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim (and/or double-lengths), first segment |
| Quality: |
veneer - light color, no knots, no bulge, straight, round trunk, no rot,
no decay, no wormholes, no cracks, no splits, etc. |
| Red heart: |
in the middle of the trunk, round, sound, max. 25% |
Beech logs 2nd grade (A grade)
| Minor diameter: |
35 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, no twist |
| Knots: |
no |
| Splits: |
allowed is one straight split, which can reach up to red heart |
| Color: |
white |
| Necrosis: |
no |
| Rot and wormholes: |
no |
| Bend: |
no |
Beech logs 3rd grade (B grade)
| Minor diameter: |
25 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, allowed: some twist |
| Knots: |
allowed: some sound knots |
| Splits: |
both ends, which can reach up to red heart. The total length of these
splits on the surface may not exceed the double-length of diameter |
| Color: |
25-34 cm practically white (usual core allowed), 20% sound red heart
allowed, only round red heart is allowed |
| Necrosis: |
no |
| Rot and wormholes: |
no |
| Bend: |
only one-sided bend up to 3cm per one meter (total 10cm) is allowed |
Cherry logs 1st grade (Veneer grade)
| Minor diameter: |
30 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
veneer - no knots, no bulge, straight, round trunk, no rot, no decay, no
wormholes, no cracks, no splits, etc. |
| Color: |
reddish without green strips |
Cherry logs 2nd grade (A grade)
| Minor diameter: |
30 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, no twist |
| Knots: |
no |
| Splits: |
allowed is one straight split. The total length of the split on the
surface may not exceed the length of diameter |
| Minerals: |
no |
| Rot and wormholes: |
no |
| Bend: |
no |
Cherry logs 3rd grade (B grade)
| Minor diameter: |
25 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge
allowed: some twist |
| Knots: |
allowed: some sound knots |
| Splits: |
allowed are straight splits on both ends. The total length of these splits
on the surface may not exceed the double-length of diameter
allowed: max. 20% of colored heart at the top end |
| Minerals: |
no |
| Rot and wormholes: |
no |
| Bend: |
allowed: one-sided bend of max. 5 cm allowed |
Sycamore (Maple) logs 1st grade (Veneer grade)
| Minor diameter: |
30 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim (and/or double-lengths), first segment |
| Quality: |
veneer - no knots, no bulge, straight, round trunk, no rot, no decay, no
wormholes, no cracks, no splits, etc. |
| Color: |
white, max. 25% of brown heart |
Sycamore (Maple) logs 2nd grade (A grade)
| Minor diameter: |
30 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, no twist. |
| Knots: |
no |
| Splits: |
allowed: one straight split.
The total length of the split on the surface may not exceed the length of diameter |
| Color: |
white |
| Minerals: |
no |
| Rot and wormholes: |
no |
| Bend: |
no |
Sycamore (Maple) logs 3rd grade (B grade)
| Minor diameter: |
25 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim |
| Quality: |
sound, no bulge, allowed: some twist |
| Knots: |
allowed: some sound knots |
| Splits: |
allowed are straight splits on both ends. The total length of these splits
on the surface may not exceed the double-length of diameter |
| Color: |
white
allowed: max. 20% of colored heart at the top end |
| Minerals: |
no |
| Rot and wormholes: |
no |
| Bend: |
allowed: one-sided bend of max. 5 cm allowed |
Ash logs 1st grade (Veneer grade)
| Minor diameter: |
35 cm+, under bark |
| Length: |
3.0 m + 10 cm free trim (and/or double-lengths), first segment |
| Quality: |
veneer - no knots, no bulge, straight, round trunk, no rot, no decay, no
wormholes, no cracks, no splits, etc. |
| Brown heart: |
in the middle of the trunk, round, sound, max. 25% |
Later we were able to offer you alder, lime, birch, pine, spruce and fir logs.
Now we can offer you pine logs only on negotiated prices.
Flooring Boards
Finished flooring boards
| Type of Goods: |
flooring boards |
| Species: |
oak |
| Dimensions: |
18 x 90 x 900 mm
18 x 110 x 900 mm |
| Tolerances: |
-0.1mm, +0.2mm on thickness
-0.1mm, +0.2mm on width
-0.2mm, +0.2mm on length |
| Moistness: |
KD 6..10% |
Quality of the Flooring Boards:
Flooring boards are made from ecologically clean raw materials.
Finished parquet meet the requirements in accordance with DIN 280
N 1-90 standard and GOST 862.1-85 state standard. |
| Detailed Requirements: |
| Grade "A" |
- radial sawing
- knots not allowed
- sapwood not allowed
- “cat's paw” allowed (tightly packed pin knots)
|
| Grade "B" |
- slash sawing
- knots not allowed
- sapwood not allowed
- “cat's paw” allowed (tightly packed pin knots)
|
| Grade "C" |
- radial and slash sawing
- sound knot with diameter not more 15mm are allowed
- sapwood allowed only on bottom face
|
| General Requirements: |
- rot, insects, wormholes, bark, shakes not allowed
- falling out knots, knot holes, dead knots not allowed
|
| Packing: |
- on pallets
- one dimension per one pallet
|
| Supply Basis: |
FCA Cherkassy, Ukraine
FCA Lvov region, Ukraine
FCA Odessa region, Ukraine
FCA Poltava region, Ukraine |
| Prices: |
Grade |
Price, EUR/square meter for dimension:
|
| 18 x 90 x 900mm |
18 x 110 x 900mm |
| Grade "A" |
negotiated |
negotiated |
| Grade "B" |
negotiated |
negotiated |
| Grade "C" |
negotiated |
negotiated |
Prices can vary on different suppliers. Please give your requirements and we will give you right supplier and prices on final product you need.
Parquet Flooring
Finished parquet flooring
| Type of Goods: |
parquet flooring |
| Species: |
oak, red oak, cherry, beech, steamed beech, ash, maple |
| Dimensions: |
| Thickness: |
16.5, 22mm |
| Width: |
40, 50, 60, 70mm |
| Length: |
220, 250, 300, 350, 400, 420, 450mm 500, 600mm |
| Tolerances: |
-0.1mm, +0.2mm on thickness
-0.1mm, +0.2mm on width
-0.2mm, +0.2mm on length |
| Moistness: |
KD 7..10% |
Quality of the Parquet Flooring:
Parquet is made from ecologically clean raw materials.
Finished parquet meet the requirements in accordance with DIN 280
standard. |
| Detailed requirements: |
| "Select" grade |
- select grade
- no defects
- uniform color of wood
|
| "Standard" grade |
- smooth varies in color of wood, natural dye penetrations
- sound knots with diameter not more 1.5mm are accepted
|
| "Natures" grade |
- unnatural dye penetrations
- knots with diameter not more 5mm are accepted
|
| "Country" grade |
- unnatural dye penetrations
- knots with diameter not more 10mm are accepted
- face and end cracks not longer than 15mm are accepted
|
| Packing: |
- on pallets
- one dimension per one pallet
|
| Supply Basis: |
FCA Ukraine
FAS, FOB Odessa or Ilyichevsk port, Ukraine
DDU destination place |
Industrial Parquet
|
|
Industrial parquet specification
| Type of Goods: |
industrial parquet |
| Species: |
oak, ash |
| Dimensions: |
| Thickness: |
16, 22, 22.85mm |
| Width: |
8, 16, 18mm |
| Length: |
120, 160mm |
| Tolerances: |
-0.15mm, +0.15mm on thickness
-0.15mm, +0.15mm on width
-0.3mm, +0.3mm on length |
| Moistness: |
KD 8% |
| Volume: |
up to 10000 sq.m./month |
| Quality Requirements: |
Grade A: Great geometry used for mosaic parquet.
Grade B: some defect can appear on bottom side of elements
General Requirements:
sound knots, sapwood, yellow color allowed without limitations
big knots, cracks, wormholes not allowed |
| Supply Basis: |
FCA Ukraine, DDU destination point
|
Oak Sawn Timber
|
|
Oak flooring elements
| Type of Goods: |
lumber, strips, flooring elements |
| Species: |
oak |
| Dimensions, mm: |
29 x 65 x 270/ 320/ 370/ 420/ 470
29 x 75/85 x 320/ 370/ 420/ 470/ 520/ 620/ 670/ 720 |
| Tolerances: |
-0.0mm, +2.0mm on thickness
-0.0mm, +3.0mm on width
-0.0mm, +10.0mm on length |
| Moistness: |
fresh cut |
| Volume: |
up to 250 cbm/month |
| Quality Requirements: |
| Grade "A" |
- 4 sides clear without any defects
- sapwood, heartwood not allowed
|
| Grade "A1" |
- 3 sides clear
- up to 2..3 sound knots with max. diameter 10mm per running meter allowed
only on bottom face
- sapwood, heartwood not allowed
|
| Grade "B" |
- up to 2..3 sound knots with max. diameter 15mm per running meter
allowed on both faces
- up to 2..3 dark non-lose knots with max. diameter 5mm per running
meter allowed on both faces
- sapwood, heartwood not allowed
|
| Grade "C" |
- knots not allowed
- through sapwood up to 33% width of the element only on bottom face
is allowed
- heartwood not allowed
|
General
Requirements: |
- rot, insects, wormholes not allowed
- face, end and edge cracks not allowed
- ring shakes not allowed
|
| Packing: |
- on pallets
- one dimension per one pallet
- waxed ends of the element
|
| Supply Basis: |
FCA Lvov, Ukraine
FCA Cherkassy, Ukraine
FAS Odessa, Ukraine |
Oak boards, elements
| Type of Goods: |
lumber, boards, elements |
| Species: |
oak |
| Dimensions, mm: |
29 x 105 x 720...2020
29 x 135 x 820..2320
29 x 155 x 920..2820
29 x 155..205 x 1720..3020
29 x 215..305 x 1720..3020 |
| Tolerances: |
-0.0mm, +2.0mm on thickness
-0.0mm, +4.0mm on width
-0.0mm, +20.0mm on length |
| Moistness: |
fresh cut |
| Volume: |
up to 400 cbm/month |
| Quality Requirements: |
| Grade "A" |
- 4 sides clear without any defects
- sapwood, heartwood not allowed
|
| Grade "A1" |
- 3 sides clear
- up to 2..3 sound knots with max. diameter 10mm per running meter
allowed only on bottom face
- sapwood, heartwood not allowed
|
| Grade "B" |
- up to 2..3 sound knots with max. diameter 25mm per running meter
allowed only on top face
- up to 2..3 dark non-lose knots with max. diameter 15mm per running
meter allowed on both faces
- sapwood, heartwood not allowed
|
| Grade "C" |
- knots with diameter 35mm allowed on both faces
- up to 1..2 sound knots with max. diameter 50mm per running meter
allowed
- heartwood up to 50% length of the board only on bottom face is allowed
- through sapwood is allowed
|
General
Requirements: |
- rot, insects, wormholes not allowed
- face, end and edge cracks not allowed
- ring shakes not allowed
|
| Packing: |
- on pallets
- one dimension per one pallet
- waxed ends of the element
|
| Supply Basis: |
FCA Lvov, Ukraine
FCA Cherkassy, Ukraine
FAS Odessa, Ukraine |
Beech Sawn Timber
Beech boards, furniture and flooring elements
| Type of Goods: |
lumber, boards, elements |
| Species: |
beech |
| Dimensions, mm: |
28 x 65 x 270/320/370/420/470
28 x 75/85 x 320/370/420/470/520/620/670/720
28 x 105 x 820..2020
28 x 155 x 920..2820
28 x 155..205 x 1720..3020
28 x 215..305 x 1720..3020
65 x 65 x 470..1720
80 x 80 x 770..970
|
| Tolerances: |
-0.0mm, +2.0mm on thickness
-0.0mm, +4.0mm on width
-0.0mm, +10.0mm on length |
| Moistness: |
fresh cut or KD 6..14% |
| Volume: |
up to 300 cbm/month |
| Quality Requirements: |
| Grade "A" |
- 4 sides clear without any defects
- false heartwood not allowed
|
| Grade "B" |
- 3 sides clear
- up to 2..3 knots with max. diameter 15mm per running meter allowed only on bottom face
- false heartwood not allowed
|
| Grade "C" |
- 1..3 faces clear
- up to 2..3 sound knots with max. diameter 15mm per running meter allowed only on bottom face
- false heartwood on bottom face is allowed up to 50% of the thickness of the element
|
| Grade "Rustic" |
- up to 2..3 sound knots with max. diameter 40mm per running meter
allowed on both faces
- up to 1..2 dark knots with max. diameter 25mm per running meter allowed
on both faces
- false heartwood allowed without limitations
|
General
Requirements: |
- rot, insects, wormholes not allowed
- face, end and edge cracks not allowed
- ring shakes not allowed
|
| Packing: |
- on pallets
- one dimension per one pallet
- waxed ends of the element
|
| Supply Basis: |
FCA Ukraine
FAS, FOB Odessa or Ilyichevsk port, Ukraine
DDU destination place |
Softwoods Lumber
|
|
Pine, Spruce, Fir boards and square beams
| Type of Goods: |
lumber, boards, square beams and bars |
| Species: |
pine, spruce, fir |
| Dimensions: |
| Thickness: |
28, 34, 40, 50, 60, 70, 80, 100mm |
| Width: |
50, 56, 70, 100, 125, 150, 175, 200mm
225, 250, 300, 350mm |
| Length: |
3050..6050mm and up, step 500mm |
| Tolerances: |
-0.0mm, +4.0mm on thickness
-0.0mm, +4.0mm on width
-0.0mm, +60.0mm on length |
| Moistness: |
fresh cut or KD 8..14% |
| Volume: |
up to 600 cbm/month |
| Quality Requirements: |
| The quality of 1, 2, 3, 4 grades according to Sawn
timber of softwoods. Specification according to GOST 8486-86 and
GOST 24454-80 |
| Supply Basis: |
FCA Western Ukraine, FCA Central Ukraine
FOB, FAS Odessa, Ilyichevsk port, Ukraine
DDU destination place |
Construction Timber and Sleepers
|
|
Hardwood and Softwood Construction Timber, Sleepers
| Type of Goods: |
edged and unedged boards, square beams and bars, sleepers |
| Species: |
Softwoods: pine, spruce, fir
Hardwoods: oak, beech |
| Dimensions: |
| Thickness: |
50, 60, 70, 80, 100, 125, 150, 175, 200mm |
| Width: |
50, 56, 70, 100, 125, 150, 175, 200mm
225, 250, 300, 350mm |
| Length: |
2050..8050mm and up, step 500mm |
| Tolerances: |
-0.0mm, +6.0mm on thickness
-0.0mm, +6.0mm on width
-0.0mm, +60.0mm on length |
| Moistness: |
fresh cut, KD 8..14%, AD 14..18% |
| Volume: |
up to 600 cbm/month |
| Quality Requirements: |
| Softwoods: The quality of 1, 2, 3, 4 grades according to Sawn
timber of softwoods. Specification according to GOST 8486-86 and
GOST 24454-80
|
| Hardwoods: The quality of 1, 2, 3 grades according to Sawn timber of hardwoods. Specification according to GOST 2695-83
|
| Supply Basis: |
FCA Western Ukraine, FCA Central Ukraine
FOB, FAS Odessa, Ilyichevsk port, Ukraine
DDU destination place |
Oak Lamellas
|
|
Oak lamellas are mostly used in flooring industry. These lamellas are used as the top layer in multilayer parquet and deck production.
We offer the best quality provided by Rotoles and Wintersteiger machines.
Lamellas thickness: 2.8, 3.6, 4.0, 4.1, 4.2, 5.4, 6.0 mm
Please contact us with your inquiry.
Glued Panels and Beams
|
|
We offer Pine, Spruce, Fir, Beech and Oak glued panels assembled from finger joint or continuous elements and multilayer glued beams used for door, windows and furniture production.
Glue class is D4.
Packaging Timber, Pallets and Firewood
|
|
Feel free to contact us if you need any such kind of product as elements for pallets production (pine, spruce, fir, birch, alder and poplar), ready pallets or any other kind of packaging timber or firewood (oak, beech, birch).
Veneer
Oak veneer, sycamore veneer, cherry veneer, ash veneer, steamed and non-steamed beech veneer
We offer high-quality oak, sycamore, cherry, ash and beech sliced veneer which
is ideal for interior furniture applications.
Find prices and more information about sliced veneer and visit gallery at the veneer section.
|
